Manufacturer, not a trading company · Xiner Road workshop, Bao'an, Shenzhen, China

INGUN part number? Here is the LH equivalent.

Type the number marked on your fixture probe — for example GKS 100 307 150 A3000 — and the converter applies the manufacturer's own published rules to give the LH part. Below the tool are the rules themselves and every confirmed part-number pair, so you can check the answer rather than take it on trust.

Rules published, not hidden
17 confirmed part-number pairs
Tip codes and receptacles included
Close recommendations marked as such
Open the full table See the conversion rules

Converter

Runs entirely in your browser. Nothing is sent anywhere until you email us.

Five LH probes with different tip geometries, LH PROBE engraved along each barrel
The five tip codes most often converted, as our catalogue shows them. The marking on the barrel is what a technician reads before ordering a replacement.
The converter gives the answer the factory's own rules produce. It is a starting point for a quotation, not a guarantee of interchangeability: plating thickness, spring rate and mechanical life are not part of the numbering scheme and differ by order. Reply to the conversion email we send with your fixture stack height and we confirm against the drawing.

Every confirmed part-number pair

These 17 pairs come straight from the manufacturer's cross-reference sheet. Where a row does not follow the rules cleanly, it is marked and explained underneath — we have not quietly deleted the awkward ones.

INGUNLH equivalentPitchTipNote
GKS 003 206 254 A2000LH-200 C06 250 2N—206, where the map gives 306Close recommendation B
GKS 050 214 050 A2800LH-078 B14 050 2.2N1.27 mm (.050)214 / B14Force differs A
GKS 050 291 050 A2000LH-078 B91 050 2N1.27 mm (.050)291 / B91—
GKS 075 214 050 A2800LH-102 B14 050 2.8N1.91 mm (.075)214 / B14—
GKS 075 214 064 A2000LH-102 B14 064 2N1.91 mm (.075)214 / B14—
GKS 075 225 120 A2800LH-102 B25 120 2.8N1.91 mm (.075)225 / B25—
GKS 075 291 064 A2800LH-102 B91 064 2.8N1.91 mm (.075)291 / B91—
GKS 075 303 120 A2800LH-102 C03 120 2.2N1.91 mm (.075)303 / C03Force differs A
GKS 100 214 050 A3000LH-137 B14 050 3N2.54 mm (.100)214 / B14—
GKS 100 214 130 A3000LH-137 B14 130 3N2.54 mm (.100)214 / B14—
GKS 100 225 130 A3000LH-137 B25 130 3N2.54 mm (.100)225 / B25—
GKS 100 291 090 A3000LH-137 B91 090 3N2.54 mm (.100)291 / B91—
GKS 100 303 150 A2000LH-137 C03 150 2N2.54 mm (.100)303 / C03—
GKS 100 303 150 A3000LH-137 C03 150 3N2.54 mm (.100)303 / C03—
GKS 100 305 090 A3000LH-137 C05 090 3N2.54 mm (.100)305 / C05—
GKS 100 307 150 A2000LH-137 307 150 2N2.54 mm (.100)307 / C07Tip written as number C
GKS 100 307 150 A3000LH-137 C07 150 3N2.54 mm (.100)307 / C07—
A Force differsThe sheet lists the LH spring force as 2.2 N against an INGUN force code of A2800 (2.8 N). We quote the LH figure and flag the difference rather than correcting one column to match the other.
B Close recommendationThis row was written by the factory as 相近推荐 — a close recommendation, not an equivalent. The tip code (206 against the rule's 306) and the length (254 against 250) both sit outside the conversion rules, which is why it is treated differently.
C Tip written as a numberThe LH column here carries the INGUN-style numeric tip code (307) instead of the LH letter code. Per the tip table below, 307 = C07, so the part is LH-137 C07 150 2N. We print it as received and give the reading.

The conversion rules

Everything the converter does, it does with these four tables and nothing else. They are published so a competitor can be checked and so you can convert a number we have never seen.

1. Series and pitch

INGUN seriesLH seriesPitch
GKS 040LH-0611.00 mm (.039)
GKS 050LH-0781.27 mm (.050)
GKS 075LH-1021.91 mm (.075)
GKS 100LH-1372.54 mm (.100)
GKS 003LH-200Large-pitch series
GKS 004LH-236Large-pitch series

2. Tip code

LHINGUNLHINGUNLHINGUN
B01201C02302B91291
B14214C03303B93293
B25225C05305B97297
B88288C06306B89289
C07307————

What each tip geometry does is on the tip-style page.

3. Spring force

INGUN force codeSpring force
A20002.0 N
A28002.8 N
A30003.0 N
Only these three force codes were given by the factory. Other LH force options exist (1.0 N, 1.5 N, 2.5 N on some series) but we publish no INGUN code for them, because we have not been given one.

4. Receptacles

INGUNLH
KS-050 E08LHR078-08DX
KS-075 30GLHR102-4S
KS-075 47GLHR102-4W / LHR102-4FL
KS-100 30GLHR137-4S
KS-100 47GLHR137-4W / LHR137-4FL
KS-001 30GLHPR102-3S
KS-001 47GLHPR102-3W
KS-003 30GLHR200-4S
KS-004 30GLHR236-4S

What this page does not cover

OTHER MAKERS

Feinmetall, PTR / HARTMANN, ECT

The factory has no written cross-reference for these. If you are holding one of their part numbers, send it — we compare against drawings case by case and tell you honestly when there is no match.

OUTSIDE THE SIX SERIES

LHRF, LHP, POGO, BGA double-ended

RF spring-contact probes, PCB probes, pogo pins and double-ended BGA probes are not in the numbering rules above, so the converter will not guess them. Ask and we answer from the drawing.

NOT IN ANY NUMBER

Plating thickness, life cycles

Gold thickness over nickel and mechanical life are not encoded in either manufacturer's part number and are not published here. They are confirmed per order against the specification you require.

INGUN is a trademark of its owner. This page exists to identify which LH probe the manufacturer's own records treat as dimensionally comparable. Dejiabao is not a licensee, distributor or agent of INGUN, and nothing here claims otherwise or implies endorsement. Full terms.

Send the number you are holding

Tell us the INGUN part marked on the probe, the pitch of your fixture and what you are testing. We reply with the LH part, what changes, and a price.